Quilting Services and Pricing
Greetings and welcome to Cloverdale Quilting. My name is Margaret Davids, and I provide longarm quilting services to individuals who would like to transform their pieced tops into beautiful finished quilts. I understand how much time and labor you have invested into your pieced work, and with that always in mind, I take great care to insure the quality of your finished product. For the ultimate in design flexibility and artistry in my stitching, I exclusively use a non-computerized Gammill longarm.
Pricing is based on the size of the quilt and the complexity of the stitching. Specific pricing and examples of the different stitching types can be seen below. A large array of pantograph selections are available.
You can also find quilt preparation tips below. If anything is unclear or if there are any questions at all, please call me or send me an email. I look forward to working with you on your project.
Overall edge-to-edge meandering: 1.5 cents per square inch
Overall edge-to-edge stipple (which is a smaller, denser meander): 2.0 cents per square inch
Simple pantograph pattern: 2.5 cents per square inch
Complex pantograph pattern: 3.5 cents per square inch
Custom patterns are quoted individually.
Binding service, machine sewn to front: 11 cents per linear inch
Binding service, hand sewn to back: 22 cents per linear inch
Standard thread: $1.50 per bobbin
Variegated thread: $2.00 per bobbin
Batting, Hobbs 80/20 blend: $8.00 per yard
Quilt Preparation Tips
- There are three layers to your quilt, the quilt top, the batting, and the back. These three layers will be loaded on the longarm independently so please don't pin or baste your layers together.
- Always trim your salvages before sewing your back together. Use 5/8" seams and press.
- Sides should be straight. Ripping as opposed to cutting fabric will give you a straigher edge.
- If you decide to make your backing fun with piece work, don't be symmetrical with it, or have a center monogram, or a border, it will be "off" in the final product.
- Backing should be squared. This ensures the quilt loads on the longarm straight.
- Thread used for the top will be the same for the back, otherwise you get the appearance of specks on the quilt. So, keep in mind, if you don't want thread with a contrast on the back pick a fabric that matches the front.
- Always make your quilt back four to six inches larger than the front on all sides . I will not be able to center your quilt top if the back is the same size as the front.
- If you have a specific batting you want to use please provide that for me, otherwise I have Hobbs 80/20 blend that I can provide for you.
- Your batting should be the same size as the quilt back, which is always 4-6 inches larger then the quilt front in both directions.
- Make sure your quilt lies flat. If there are ripples or puffiness in the quilt top, the piece may not quilt flat.
- Make sure your border does not have waves or ripples. Make sure your quilt top is squared, meaning that the measurements are the same on both ends and in the middle.
- Press all seams and remove any loose threads from the back of the quilt top, otherwise you will be able to see these threads, especially if it's a light color.
- If you have seams on the outer edges of your quilt top, please baste 1/8" around the edges or place a two to three inch border around the edges. This prevents the seams from coming apart when put on the longarm. The advantages of basting or putting on a border on seam edges are that it stabilizes the quilt, secures the border seams, and allows me to quilt off the edge.
- Please don't put embellishments or have flaps on your quilt top.
- If your quilt has a top and bottom please put a piece of masking tape or a pin for the top.
- Most quilters do their own binding, however if you wish me to do that for you please provide one yard of fabric. I will machine sew the binding to the front and hand sew to the back with mitered corners.
111 Lake Street
Cloverdale, CA 95425